Compatibility · Telwin
ArcDroid and Telwin
Technology Plasma 41 and 54 Kompressor, Superior Plasma 70 and 100: compatible on pilot-arc versions.
Compatible with the ArcDroid
CPC · CNC5 minModels
Compatible Telwin plasma cutters
- Technology Plasma 41
- Technology Plasma 54 Kompressor
- Superior Plasma 70
- Superior Plasma 100
Compatible on pilot-arc models; we confirm by phone for your version.
Connection
How we hook it up
The connection depends on the version; we confirm by phone from the exact model number and provide the wiring diagram.
- 01
Clamp the ArcDroid to the table and plug in its power supply.
- 02
Connect the cutter's torch or CNC output to the ArcDroid controller.
- 03
Fit your torch in the universal holder and tighten both clamps.
- 04
Run the guided calibration on screen: height probing, arc-start test, arc-voltage setting.
- 05
Trace or import your first part. Cut.
In practice
Cutting with a Telwin on the ArcDroid
What the ArcDroid controls
On Telwin units fitted with a CNC output, the ArcDroid fires the arc and reads the divided arc voltage: the torch height adjusts itself during the cut. On versions without a CNC output, it wires to the torch trigger and cuts at a fixed height after probing the sheet.
Starting settings
Set the amperage on the Telwin for the thickness, as you would for hand cutting. Speed, pierce height and cut height are set on the ArcDroid's screen, with no computer. Our reference values by thickness and amperage are in the guide.
Read the article: Plasma cutting thickness: what a 45, 65 or 105 A unit really cuts →Before you order
Three checks are enough: the exact model reference of your Telwin, the start type (pilot arc or contact, never HF) and whether it has a CNC output or an accessible torch trigger. In doubt? Send us a photo of the rating plate.
Read the article: Which plasma cutter should you choose for a CNC machine? →Questions
Telwin and ArcDroid
Does the Technology Plasma 54 Kompressor work without an external compressor?
Yes, that is its point: built-in compressor, cuts thin and medium sheet (around 10 mm), ideal on the move with the ArcDroid.
Does automatic torch height control work with a Telwin?
Yes on versions fitted with a CNC output (divided arc voltage). On the others, the ArcDroid cuts at a fixed height after probing the sheet — perfect on a flat sheet.
Can I keep my Telwin hand torch?
Yes. The hand torch mounts in the ArcDroid's universal holder with no modification: two clamps to tighten, and you have it back in your hand just as quickly for hand cutting.
Unsure about your version?
Send a photo of the rating plate, we reply the same day.