Compatibility · Jasic
ArcDroid and Jasic Cut
Pilot-arc Cut 45, 60, 80 and 100: compatible.
Compatible with the ArcDroid
CPC · CNC5 minModels
Compatible Jasic plasma cutters
- Cut 45
- Cut 60
- Cut 80
- Cut 100
Pilot-arc models only.
Connection
How we hook it up
Connection through the CNC output or the torch control depending on the version. Pilot-arc models only.
- 01
Clamp the ArcDroid to the table and plug in its power supply.
- 02
Connect the cutter's CNC or torch output to the ArcDroid controller.
- 03
Fit your torch in the universal holder and tighten both clamps.
- 04
Run the guided calibration on screen: height probing, arc-start test, arc-voltage setting.
- 05
Trace or import your first part. Cut.
In practice
Cutting with a Jasic on the ArcDroid
What the ArcDroid controls
On Jasic units fitted with a CNC output, the ArcDroid fires the arc and reads the divided arc voltage: the torch height adjusts itself during the cut. On versions without a CNC output, it wires to the torch trigger and cuts at a fixed height after probing the sheet.
Starting settings
Set the amperage on the Jasic for the thickness, as you would for hand cutting. Speed, pierce height and cut height are set on the ArcDroid's screen, with no computer. Our reference values by thickness and amperage are in the guide.
Read the article: Plasma cutting thickness: what a 45, 65 or 105 A unit really cuts →Before you order
Three checks are enough: the exact model reference of your Jasic, the start type (pilot arc or contact, never HF) and whether it has a CNC output or an accessible torch trigger. In doubt? Send us a photo of the rating plate.
Read the article: Which plasma cutter should you choose for a CNC machine? →Questions
Jasic and ArcDroid
My Jasic Cut 40 (HF)?
Not compatible: high-frequency start disturbs the electronics. A pilot-arc Cut 45 is the natural replacement.
Does automatic torch height control work with a Jasic?
Yes on versions fitted with a CNC output (divided arc voltage). On the others, the ArcDroid cuts at a fixed height after probing the sheet — perfect on a flat sheet.
Can I keep my Jasic hand torch?
Yes. The hand torch mounts in the ArcDroid's universal holder with no modification: two clamps to tighten, and you have it back in your hand just as quickly for hand cutting.
Unsure about your version?
Send a photo of the rating plate, we reply the same day.