Compatibility · Everlast
ArcDroid and Everlast PowerPlasma
PowerPlasma 52i, 62i, 82i, 102i: a dedicated cable links the Everlast CNC port to the ArcDroid.
Compatible with the ArcDroid
CPC · CNC5 minModels
Compatible Everlast plasma cutters
- PowerPlasma 52i
- PowerPlasma 62i
- PowerPlasma 82i
- PowerPlasma 102i
Everlast cable required (€58).
Connection
How we hook it up
The Everlast cable (€58) carries trigger and divided arc voltage. Check that your version has the CNC port.
- 01
Clamp the ArcDroid to the table and plug in its power supply.
- 02
Connect the cutter's CNC output to the ArcDroid controller.
- 03
Fit your torch in the universal holder and tighten both clamps.
- 04
Run the guided calibration on screen: height probing, arc-start test, arc-voltage setting.
- 05
Trace or import your first part. Cut.
In practice
Cutting with a Everlast on the ArcDroid
What the ArcDroid controls
Through your Everlast's CNC output, the ArcDroid fires the arc and reads the divided arc voltage: the torch height adjusts itself during the cut, even on a slightly warped sheet.
Starting settings
Set the amperage on the Everlast for the thickness, as you would for hand cutting. Speed, pierce height and cut height are set on the ArcDroid's screen, with no computer. Our reference values by thickness and amperage are in the guide.
Read the article: Plasma cutting thickness: what a 45, 65 or 105 A unit really cuts →Before you order
Three checks are enough: the exact model reference of your Everlast, the start type (pilot arc or contact, never HF) and where the CNC output is. In doubt? Send us a photo of the rating plate.
Read the article: Which plasma cutter should you choose for a CNC machine? →The cable
One cable and you're connected.
For the PowerPlasma 52i, 62i, 82i and 102i with CNC port.
Questions
Everlast and ArcDroid
My Everlast has no CNC port.
Then it connects through the torch trigger, without automatic height control. Call us, we'll look at it together.
Does automatic torch height control work with a Everlast?
Yes: the Everlast's CNC output supplies the divided arc voltage the ArcDroid uses to adjust the torch height during the cut.
Can I keep my Everlast hand torch?
Yes. The hand torch mounts in the ArcDroid's universal holder with no modification: two clamps to tighten, and you have it back in your hand just as quickly for hand cutting.
Unsure about your version?
Send a photo of the rating plate, we reply the same day.